MSA Ultima MOS-5 - 9.3.4 Environmental Specifications; 9.4 Approvals

Ultima MOS-5 Detector
57
9.3.4 Environmental Specifications
9.4 Approvals
CE Marking; CSA, FM, ATEX, IECEx and GOST approved. Complies with ANSI/ISA-
92.0.01:1998, performance requirements. SIL 2/3 suitable (use in typical environments has
a lower safety rating than in clean environments). HART Registered.
HART:
• Approved by the HART Communication Foundation.
• Compatible with Emersion 375 Field Communicator.
• Listed in Emerson Process Management’s Aware device list.
9.5 Spare Parts and Accessories
To order spare parts and/or accessories, please contact the nearest MSA Representative or,
MSA directly, and give the following information:
• Part Number of Spare Part or Accessory
• Description of Spare Part or Accessory
• Quantity of Spare Part or Accessory
9.5.1 Sensors
50445-1 0 to 100 ppm, Aluminum Body, Wire Screen Arrestor
50445-5 0 to 50 ppm, Aluminum Body, Wire Screen Arrestor
50445-9 0 to 20 ppm, Aluminum Body, Wire Screen Arrestor
50448-1 0 to 100 ppm, Stainless Steel Body, Wire Screen Arrestor
50448-5 0 to 50 ppm, Stainless Steel Body, Wire Screen Arrestor
50448-9 0 to 20 ppm, Stainless Steel Body, Wire Screen Arrestor
51457-1L 0 to 100 ppm, Stainless Steel Body, Sintered Steel Arrestor
Operating Temperature
Range
CSA FM ATEX/IECEx
Electronics
Division Classification
-40°F to 167°F (-40°C to 75°C)
Zone Classification
-40°F to 158°F (-40°C to 70°C)
-40°F to 140°F
(-40°C to 60°C)
-40°F to 158°F
(-40°C to 70°C)
Storage Temperature Range
-58°F to 185°F (-50°C to +85°C)
Operating Humidity Range
10% to 95% RH, non-condensing