3-17
BIOS Setup
PS2KB Wakeup From S3/S4/S5
This setting allows you to wake up the system from S3/S4/S5 states with the
options of [Any Key], [Hot Key] and [Password] (max. 8 numbers).
PS2MS Wakeup From S3/S4/S5
This controls how the PS/2 mouse can power on the system. Settings: [Click],
[Move & Click], [Disabled].
Resume By Alarm
The field is used to enable or disable the function of Resume By Alarm. Settings:
[Disabled], [Enabled].
Month Alarm
When Resume By Alarm is set to [Enabled], the field specifies the month for
Resume By Alarm. Settings: [NA], [1]-[12].
Date of Month Alarm
When Resume By Alarm is set to [Enabled], the field specifies the date for
Resume By Alarm. Settings: [0]~[31].
Time (hh:mm:ss) Alarm
When Resume By Alarm is set to [Enabled], the field specifies the time for
Resume By Alarm. Format is <hour><minute><second>.
** Reload Global Timer Events **
Primary/Secondary IDE, FDD/COM/LPT Ports, PCI PIRQ [A-D]#
The global timer is the hardware timer that counts down to the power saving modes.
If the monitoring of the listed hardware peripherals or components is enabled, the
activity of the specified peripherals or components will awaken the system or reload
the original count of global timer when they are accessed.
To Next Page
Loading...
