Appendix A
A-2
The mainboard is able to transform the audio connectors on the back panel
from 2-channel to 4-/6-channel. To use the function, you need to install the C-
Media drivers.
To install C-Media drivers:
1. Insert the companion CD into the CD-ROM drive. The setup screen will
automatically appear.
2. Click on C-Media Sound Drivers.
3. Follow the on-screen instructions to complete installation.
4. Restart the system.
Installing C-Media Drivers
After installing the C-Media drivers, you can attach the speakers for 4-/6-
channel audio output. Always connect the speakers to the LINE OUT
connectors. Different connector configurations for 2-/4-/6-channel operations
are listed below:
Hardware Configuration
Note: For Windows NT4.0, you need to install the C-Media Sound
Drivers manually.
2-Channel
4-Channel
6-Channel
MICLINE OUT Line In
MICLINE OUT LINE OUT
LINE OUTLINE OUT LINE OUT
When set to 4-channel
configuration, LINE IN function
DOES NOT WORK any more.
When set to 6-channel
configuration, LINE IN and MIC
functions DO NOT WORK
anymore.
In 2-channel configuration, Line
Out, Line In and MIC functions
all exist.
To Next Page
Loading...
