BIOS Setup
3-19
peripheral or component is detected.
Note:
1. You need to install a modem card supporting power on function
for “Resume On Ring” function.
2. For “Keyboard PowerOn Function”, the option “Specific Key”
refers to the password you specify in the “Specific Key for PowerOn”
field. You must type the password to power on the system since the
power switch will not function any more after “Specific Key” is
selected.
3. For “Mouse PowerOn Function”, you need to DOUBLE click the
mouse to power on the system if the function is enabled.
Resume On RTC Alarm
This is used to enable or disable the feature of booting up the system on a
scheduled time/date from the soft off (S5) state. Settings: Enabled, Disabled.
RTC Alarm Date/Hour/Minute/Second
If Resume On RTC Alarm is set to Enabled, the system will automatically
resume (boot up) on a specific date/hour/minute/second specified in these
fields. Available settings for each item are:
Alarm Date 01 ~ 31, Every Day
Alarm Hour 00 ~ 23
Alarm Minute 00 ~ 59
Alarm Second 00 ~ 59
To Next Page
Loading...
