BIOS Setup
3-23
Integrated Peripherals
USB Controller
This setting is used to enable/disable the onboard USB controllers. Setting
options: 2 USB Ports, 4 USB Ports, 6 USB Ports, Disabled.
USB 1.1 Legacy Support
Set to All Device if you need to use a USB1.1 device in the operating system
that does not support or have any USB driver installed, such as DOS and SCO
Unix. Set to No Mice if you want to use any USB1.1 device except the mouse.
Setting options: Disabled, No Mice, All Device.
On-Chip IDE
This setting controls the on-chip IDE controller. Setting options: Disabled,
Primary, Secondary, Both.
OnChip LAN (Optional)
The field determines whether the onboard LAN controller is activated. The
field appears only when the mainboard supports the LAN function. Setting
options: Enabled, Disabled.
AC’97 Audio
Auto allows the mainboard to detect whether an audio device is used. If an
To Next Page
Loading...
