Chapter 3
3-28
frequency; otherwise, the CPU will run at the default configuration 100MHz.
The field also allows you to overclock the processor by adjusting the FSB
clock to a higher frequency.
CPU Vcore Adjust
This setting is used to enable or disable the ability to adjust CPU Vcore for
overclocking purpose. Setting options: Yes, No.
CPU Vcore
Specify preferred CPU core voltage (Vcore) in this field.
DDR/AGP Power Voltage
Adjusting the DDR/AGP voltage can increase the DDR/AGP speed. Any
changes made to these settings may cause a stability issue, so changing the
DDR/AGP voltage for long-term purpose is NOT recommended.
Note: Changing CPU Vcore could lead to a unstable system;
therefore, it is NOT recommended to change the default setting for
long-term usage.
To Next Page
Loading...
