3-15
BIOS Setup
USB Device Wakeup From S3
This item allows the activity of the USB device to wake up the system from S3
(suspend to RAM) sleep state. Setting: [Enabled], [Disabled].
Keyboard PowerOn Function
This controls how and whether the PS/2 keyboard is able to power on the
system.You must type the password to power on the system. Settings:
[Disabled], [Any Key], [Specific Key].
Specific Key for PowerOn
Specify the password to enable for the Keyboard PowerOn Function
while setting to [Specific Key].
Mouse PowerOn Function
This controls how and whether the PS/2 mouse is able to power on the system.
Settings: [Disabled], [Any Action], [Left-button] and [Right-button].
Resume On PME#
This field specifies whether the system will be awakened from power saving
modes when activity or input signal of the specified hardware peripheral or
component is detected. Settings: [Enabled], [Disabled].
Resume On RTC Alarm
This is used to enable or disable the feature of booting up the system on a
scheduled time/date from the soft off (S5) state. Settings: [Enabled], [Disabled].
RTC Alarm Date/Hour/Minute/Second
If Resume On RTC Alarm is set to [Enabled], the system will automatically
resume (boot up) on a specific date/hour/minute/second specified in these
fields. Available settings for each item are:
Alarm Date 01 ~ 31, Every Day
Alarm Hour 00 ~ 23
Alarm Minute 00 ~ 59
Alarm Second 00 ~ 59
MSI Reminds You...
If you have changed this setting, you must let the system boot up until it
enters the operating system, before this function will work.
To Next Page
Loading...
