MSI 880GMA-E45 series - Page 58

3-22
BIOS Setup
MS-7623
Chapter 3
BIOS Setup
MS-7623
Chapter 3
OC Genie Lite
Setting this item to [Enabled] allows the system to detect the maximum FSB clock and
to overclock automatically. If overclocking fails to run, you can try the lower FSB clock
for overclocking successfully.
Memory-Z
Press <Enter> to enter the sub-menu and the following screen appears.
DIMM1~4 Memory SPD Information
Press <Enter> to enter the sub-menu and the following screen appears. This sub-
menu displays the information of installed memory.
Advance DRAM Con󰘰guration
Press <Enter> to enter the sub-menu and the following screen appears.
DRAM Timing Mode
Select whether DRAM timing is controlled by the SPD (Serial Presence Detect)
EEPROM on the DRAM module. Setting to [Auto] enables DRAM timings and the
following “Advance DRAM Con󰘰guration” sub-menu to be determined by BIOS based
on the con󰘰gurations on the SPD. Selecting [Manual] allows users to con󰘰gure the
DRAM timings and the following related “Advance DRAM Con󰘰guration” sub-menu
manually.
▶
▶
▶
▶
▶