3-7
BIOS Setup
Advanced BIOS Features
Boot Secquence
Press <Enter> to enter the sub-menu and the following screen appears:
Hard Disk Boot Priority
Press [Enter] to enter a sub menu which shows every current hard drive installed.
Use [PageUp] or [PageDown] key to select the first boot hard disk.
First/ Second/ Third Boot Device
The items allow you to set the sequence of boot devices where BIOS attempts
to load the disk operating system.
Boot From Other Deivce
Setting the option to Enabled allows the system to try to boot from other device
if the system fails to boot from the First/ Second/ Third boot device.
MSI Reminds You...
Available settings for “1st/2nd/3rd Boot Device” vary depending on
the bootable devices you have installed. For example, if you did not
install a floppy drive, the setting “Floppy” will not show up.
To Next Page
Loading...
