3-15
BIOS Setup
USB Controller
This setting is used to enable/disable the onboard USB host controller. Setting options:
[Disabled], [Enabled].
USB 2.0 Controller
Set to [Enabled] if you need to use any USB 2.0 device in the operating system that
does not support or have any USB 2.0 driver installed, such as DOS and SCO Unix.
Setting options: [Disabled], [Enabled].
USB Keyboard/Mouse Support
Set to [Enabled] if you need to use a USB keyboard/mouse in the operating system
that does not support or does not have any USB driver installed, such as DOS and
SCO Unix. Setting options: [Enabled], [Disabled].
AC97 Audio
[Auto] allows the mainboard to detect whether an audio device is used. If an audio
device is detected, the onboard AC97 (Audio Codec’97) controller will be enabled; if
not, it is disabled. Disable the controller if you want to use other controller cards to
connect an audio device. Settings: [Auto], [Disabled].
AC’97 Modem
[Auto] allows the mainboard to detect whether a modem is used. If a modem is used,
the onboard MC’97 (Modem Codec’97) controller will be enabled; if not, it is disabled.
Disable the controller if you want to use other controller cards to connect to a modem.
Settings: [Auto], [Disabled].
Onboard LAN Device
The item enables or disables the onboard LAN device. Setting options: [Enabled],
[Disabled].
Integrated Peripherals
To Next Page
Loading...
