3-11
BIOS Setup
Report No FDD for WIN 95
For compatibility with Windows 95 logo certification, select Yes to release IRQ6 when
the system contains no floppy drive. When this setting is set to Yes, users have to
select Disabled for the Onboard FDC Controller in the Integrated Peripherals menu.
Setting options: [No], [Yes].
Full Screen LOGO Display
This item enables you to show the company logo on the bootup screen. Setting
options are:
[Enabled] Shows a still image (logo) on the full screen at boot.
[Disabled] Shows the POST messages at boot.
Small Logo(EPA) Display
This item enables you to show the EPA logo (brand specific graphics) on the bootup
screen. Setting options are:
[Disabled] Shows the normal POST screen at boot.
[Enabled] Shows a still image (EPA logo) on the screen at boot.ot.
To Next Page
Loading...
