MSI A88X-G43 Series User Manual

Chapter 3
3-9 BIOS Setup
[Enabled] Enables IGD multi-screen function.
[Disabled] Disables IGD multi-screen function.
USB Con󰘰guration
Sets the onboard USB controller and device function. Press <Enter> to enter the sub-
menu.
USB Controller [Enabled]
Enables or disables the onboard USB controller.
XHCI Hand-off [Enabled]
Enables or disables XHCI hand-o󰘯 support for the operating system without XHCI
hand-o󰘯 feature.
EHCI Hand-off [Enabled]
Enables or disables EHCI hand-o󰘯 support for the operating system without EHCI
hand-o󰘯 feature.
Legacy USB Support [Enabled]
Sets Legacy USB function support.
[Auto] The system will automatically detect if any USB device is connected
and enables or disables the legacy USB support.
[Enabled] Enable the USB support for legacy operating systems that do not
support USB.
[Disabled] The USB devices are available only for UEFI applications.
Onboard USB3.0 Controller [Enabled]
Enables or disables the external USB 3.0 controller.
Super IO Con󰘰guration
Sets system Super I/O chip parameters for COM port. Press <Enter> to enter the sub-
menu.
Serial (COM) Port 0 Configuration
Sets detailed con󰘰guration of serial(COM) port 0. Press <Enter> to enter the sub-
menu.
Serial (COM) Port 0 [Enabled]
Enables or disables serial (COM) port 0.
Serial (COM) Port 0 Settings [Auto]
Sets serial port 0 (COM). If set to "Auto", BIOS will optimize the IRQ
automatically or you can set it manually.
Power Management Setup
Sets system Power Management of EuP2013 and AC Power Loss behaviors. Press
<Enter> to enter the sub-menu.
EuP 2013 [Disabled]
Enables or disables the system power consumption according to EuP2013
regulation.
[Enabled] Optimize the system power consumption according to EuP 2013
regulation.
[Disabled] Disables this function.
Note: When enabled, the system will not support RTC wake up event functions.
▶
▶
▶
▶
▶
▶
▶
▶
▶
▶
▶
▶

MSI A88X-G43 Series Specifications

General

Brand	MSI
Model	A88X-G43 Series
Category	Motherboard
Language	English