30
f
Sets the DRAM frequency. Please note the overclocking behavior is not guaranteed.
f Adjusted DRAM Frequency
f
It can improve memory compatibility or performance by choosing optimized memory
preset.
f
Sets the count of memory retry. When memory retry fails reach the count, the
memory will go back to the last available setting.
f
Press Enter
memory channel. The system may become unstable or unbootable after changing
memory timing. If it occurs, please clear the CMOS data and restore the default
settings. (Refer to the Clear CMOS jumper section to clear the CMOS data, and enter
the BIOS to load the default settings.)
f
Press Enter
f
The CPU voltage will decrease proportionally according to CPU loading. Higher
but increase the temperature of the CPU and VRM. If set to Auto, BIOS will
f
performance, but increase the temperature. If set to Auto
setting automatically.
f
Auto, BIOS will
may damage the system.
f
Auto, BIOS will
may damage the system.
f
Auto, BIOS will
To Next Page
Loading...
