54
BIOS Setup
▶ Chassis Intrusion Conguration
Press Enter to enter the sub-menu.
▶ Chassis Intrusion [Disabled]
Enables or disables recording messages while the chassis is opened. This function
is ready for the chassis equips a chassis intrusion switch.
[Enabled] Once the chassis is opened, the system will record and issue a
warning message.
[Reset] Clear the warning message. After clearing the message, please
return to Enabled or Disabled.
[Disabled] Disables this funcion.
Save & Exit
▶ Discard Changes and Exit
Exit BIOS setup without saving any change.
▶ Save Changes and Reboot
Save all changes and reboot the system.
▶ Save Changes
Save current changes.
▶ Discard Changes
Discard all changes and restore to the previous values.
▶ Restore Defaults
Restore or load all default values.
▶ Boot Override
The installed boot-able devices will appear on this menu, you can select one of them
to be the boot device.
To Next Page
Loading...
