MSI CX61 - Remove Power Board; Remove Touchpad Module

CX61/CR61 (MS-16GB)Disassembly Guide
8、UPPER CASE ASSY
8.1：：Remove 2 screws (M2*3mm), then remove
the Power board.
Attention: the screw driver torque is 1.5-2.0Kgf-cm
Component P/N Qty
screw E43-1203003-H29 2
Power board 607-16GBC-A10 1
8.2 ： Remove the Mylar, then release the
connector that stabilizes the T/P Cable, after that
remove the T/P module.
Component P/N Qty
Upper Case 307-6G4C562-TF1 1
Touchpad Module S78-3700610-E47 1