4-8
BIOS Setup
Boot menu
Boot Configuration
Configure settings during system boot.
Quiet Boot
This setting is to show POST message during POST process, if not, then it
will show OEM logo.
Setup Prompt Timeout
Number of seconds to wait for setup activation key.
Bootup NumLock State
This setting is to set the Num Lock State when the system is powered on.
Setting to On will turn on the Num Lock key when the system is powered on.
Setting to Off will allow the users to use the arrow keys on the numeric
keypad.
Set Boot Priority
This item showing the sequence of boot devices where BIOS attempts to load the
disk operating system.
To Next Page
Loading...
Need help?
General
