MSI CX70 - Remove Fan and Fan Cable; Remove Heatsink Assembly; Remove CPU Module

CX70/CR70 (MS-1755) Disassembly Guide
4、THERMAL-KIT、CPU 、DRAM AND WIRELESS
4.1: Remove the 2 screw(M2.5*5.5mm) and FAN
cable, after that remove the Fan.
Attention：the screw driver torque is 2.0-2.5Kgf-cm
Component P/N Qty
Screw E43-1255501-H29 1
FAN E31-0802202-F05 1
4.2: Remove the 6 screws (M2.5*4.5mm), after
that remove the Heatsink.
Attention：the screw driver torque is 2.0-2.5Kgf-cm
Component P/N Qty
Screw E43-1254503-G68 6
Heatsink E31-0802202-F05 1
4.3：Open the CPU Slot with Screw Driver, then
remove CPU Module as below.
Component P/N Qty
CPU OA3-16F3006 1
1
2
4
3
6
5