B-12
AMD RAID
14. Back to “Logcal Drver Man Menu” and ll “Ld Name”.
+ Logcal Drve Create Menu
+ Usable Physcal Drve Lst
+ Basc Settng
- Rad Mode : <RAID 0>
- Strpe Block (KB) : <64>
- Intalzaton : <Fast>
- Ggabyte Boundary : <Enable>
- Read Polcy : <Read Ahead>
- Wrte Polcy : <Wrte Back>
- Ld Name :
radsys_
+ Ld Sze Settng
15. Select “Ld Sze Settng” → “Start to Create”.
+ Logcal Drve Create Menu
+ Usable Physcal Drve Lst
+ Basc Settng
- Rad Mode : <RAID 0>
- Strpe Block (KB) : <64>
- Intalzaton : <Fast>
- Ggabyte Boundary : <Enable>
- Read Polcy : <Read Ahead>
- Wrte Polcy : <Wrte Back>
- Ld Name : radsys_
+ Ld Sze Settng
- Ld Max Sze : 3000.60 GB
- Ld Sze (GB) : [0]
+ Start To Create
16. When prompt “Are You Sure To Create Logcal Drve?” press Enter to conrm t.
Are You Sure To Create Logcal Drve?
‘Enter’ Key - YES / ‘Esc’ Key -NO