MSI G41TM-S01 Series

2-6
Hardware Setup ▍
MS-7602
Hardware Setup ▍
MS-7602
Press down the load lever lghtly onto
the load plate, and then secure the
lever wth the hook under retenton
tab.
9. Algn the holes on the manboard wth
the heatsnk. Push down the cooler
untl ts four clps get wedged nto the
holes of the manboard.
10.
Press the four hooks down to fasten
the cooler. Then rotate the lockng
swtch (refer to the correct drecton
marked on t) to lock the hooks.
11. Turn over the manboard to con󰘰rm
that the clp-ends are correctly n
-
serted.
12.
Manboard
Hook
Important
Read the CPU status n BIOS.
Whenever CPU s not nstalled, always protect your CPU socket pn wth the plastc
cap covered (shown n Fgure 1) to avod damagng.
Manboard photos shown n ths secton are for demonstraton of the CPU/ cooler n
-
stallaton only. The appearance of your manboard may vary dependng on the model
you purchase.
•
•
•
lockng
swtch