4-10
BIOS Setup 
 
Security Menu 
  Supervisor Password / User Password 
When this item is selected, a message box shall appear on the screen as 
below: 
 
 
 
Type a maximum of eight-digit password and press [Enter].  The 
password typed now will replace any previously set password from CMOS 
memory. You may also press [ESC] to abandon new password setting. 
 
When the Supervisor Password is set, new items User Password
 and 
Password Check
 will be added in the menu. 
 
Select User Password
 to give or to abandon password. 
 
Note that Supervisor Password field allows users to enter and change the 
settings of the BIOS SETUP UTILITY, while User Password field only 
allows users to enter the BIOS SETUP UTILITY without having the 
authorization to make any change. 
 
 
 
Enter New Password
Change Supervisor Password
Main Advanced Security Boot Exit
Atpio Setup Utility - Copyright (C) 2007 American Megatrends, Inc.
Version 2.00.1201. Copyright (C) 2009 American Megatrends, Inc.
Enter: 
+/-: 
F1: 
F9: 
F10: 
Select
Change Opt.
General Help
Optimized Defaults
Save  ESC: Exit
:
Select Screen
:Select Item
Supervisor Password
User Password:
Supervisor Password: Not Installed
Not Installed
Boot Save & Exit
ptio Setup Utility - Copyright (C) 2009 American Megatrends, Inc.
AdvancedMain Security
Set Supervisor Password.
If ONLY the  upervisorS's 
password is set, then this
only limits access to Setup
and is only asked for when
entering Setup.
Downloaded from LpManual.com Manuals