3-39
Getting Started
Connecting the External SATA Hard Disk device
The E-SATA Connector allows you to connect an external Serial ATA hard disk device. Users can
now utilize shielded cable outside the notebook to take advantage of the benefits the SATA
interface brings to storage.
The E-SATA standard interface supports “plug-and-play” technology, so that you can connect and
remove the E-SATA devices without turning off the notebook.
To connect the E-SATA hard disk device, simply connect the cable of the device to the E-SATA
Connector of your notebook.
Downloaded from LpManual.com Manuals
To Next Page
Loading...
Need help?
General
