10
unplug the power supply power cable from the power outlet. Read the expansion
card’s documentation to check for any necessary additional hardware or software
changes.
If you install a large and heavy graphics card, you need to use a tool such as
to support its weight to prevent deformation
of the slot.
BAT1
PCI_E1: PCIe 3.0 x16 (CPU lanes)
PCI1: PCI slot
PCI_E2: PCIe 2.0 x1 (PCH lanes)
PCI_E3: PCIe 2.0 x1 (PCH lanes)
These connectors are SATA 6Gb/s interface ports. Each connector can connect to one
SATA device.
SATA1
SATA2
SATA3
SATA4
Please do not fold the SATA cable at a 90-degree angle. Data loss may result
during transmission otherwise.
SATA cables have identical plugs on either sides of the cable. However, it is
saving purposes.
Downloaded from ManualsNet.com search engine
To Next Page
Loading...
