3-7
BIOS Setup
▍
MS-7638
IDE Prmary Master/ Slave & SATA1~6
Press <Enter> to enter the sub-menu and the followng screen appears:
Devce / Vendor / Sze
It wll show the devce nformaton that you connected to the IDE/ SATA connector.
Important
IDE Prmary Master/ Slave & SATA1~6 are appearng when you connect the hard dsk
devces to the IDE/ SATA connectors on the manboard.
Hold on
The settng determnes whether the system wll stop of an error s detected at boot.
When the system stops of the errors preset, t wll halt on for 15 seconds and then au
-
tomatcally resume ts operaton. Avalable optons are:
[All Error] The system stops when any error s detected.
[No Error] The system doesn’t stop for any detected error.
System Informaton
Press <Enter> to enter the sub-menu, and the followng screen appears.
Ths sub-menu shows the CPU nformaton, BIOS verson and memory status of your
system (read only).
▶
▶
▶
▶
To Next Page
Loading...
Need help?
General
