MSI H55-G33 Series - Page 65

BIOS Setup ▍
MS-7638
3-21
BIOS Setup ▍
MS-7638
Intel EIST
The Enhanced Intel SpeedStep technology allows you to set the performance level of
the mcroprocessor whether the computer s runnng on battery or AC power. Ths 󰘰eld
wll appear after you nstalled the CPU whch supports speedstep technology.
C1E Support
To enable ths tem to read the CPU power consumpton whle dle. Not all processors
support Enhanced Halt state (C1E).
Intel Turbo Boost
Ths tem wll appear when you nstall a CPU wth Intel Turbo Boost technology. Ths
tem s used to enable/ dsable Intel Turbo Boost technology. It can scale processor
frequency hgher dynamcally when applcatons demand more performance and TDP
headroom exsts. It also can delver seamless power scalablty (Dynamcally scale up,
Speed-Step Down). It s the Intel newly technology wthn 5/ 7 CPU.
Adjust CPU Base Frequency (MHz)
Ths tem allows you to set the CPU Base clock (n MHz). You may overclock the CPU
by adjustng ths value. Please note the overclockng behavor s not guaranteed.
OC Steppng
Ths tem wll be enabled after you set the overclockng frequency n the “Adjust CPU
Base Frequency (MHz)”. And the followng tems wll appear. Ths tems wll help the
system to overclock step by step after system bootng up.
Start OC Steppng From (MHz)
Ths tem s used to set the ntal base clock. The system wll boot wth the ntal base
clock, and start to overclock from ntal base clock to set base clock that you set n
“Adjust CPU Base Frequency (MHz)” step by step.
OC Step
Ths tem s used to set how many steps for base colck overclockng.
OC Step Count Tmer
Ths tem s used to set the bu󰘯er tme for every step.
Adjust CPU Rato
Ths tem allows you to adjust the CPU rato. Settng to [Startup] enables the CPU run
-
nng at the fastest speed whch s detected by system.
Adjusted CPU Frequency (MHz)
It shows the adjusted CPU frequency (Base clock x Rato). Read-only.
Adjust GPU Frequency (MHz) (only for IGP)
Ths tem wll appear when you nstall the CPU wth ntegrated graphcs. It allows you to
adjust ntegrated GPU frequency.
Current GPU Frequency (only for IGP)
Ths tem wll appear when you nstall the CPU wth ntegrated graphcs. It shows the
adjusted ntegrated GPU frequency. Read-only.
Auto OverClock Technology
Settng ths tem to [Max FSB] allows the system to detect the maxmum base frequency
and to overclock automatcally. If overclockng fals to run, you can try the lower base
frequency for overclockng successfully.
▶
▶
▶
▶
▶
▶
▶
▶
▶
▶
▶
▶
▶