MSI H55-G33 Series - Page 67

BIOS Setup ▍
MS-7638
3-23
BIOS Setup ▍
MS-7638
command. Allows sense ampl󰘰ers to restore data to cells.
CH1/ CH2 tWTR
Mnmum tme nterval between the end of wrte data burst and the start of a col
-
umn-read command. It allows I/O gatng to overdrve sense ampl󰘰ers before read
command starts.
CH1/ CH2 tRRD
Spec󰘰es the actve-to-actve delay of d󰘯erent banks.
CH1/ CH2 tRTP
Tme nterval between a read and a precharge command.
CH1/ CH2 tFAW
Ths tem s used to set the tFAW tmng.
Current CH1/ CH2 tdrRdTRd/ tddRdTRd/ tsrRdTWr/ tdrRdTWr/ tddRdTWr/
tsrWrTRd/ tddWrTWr/ tsrRDTRd/ tsrWrTWr
These tem show the advanced DRAM tmngs.
Channel 1/ Channel2 Advanced Memory Settng
Settng to [Auto] enables the advance memory tmng automatcally to be determned
by BIOS. Settng to [Manual] allows you to set the followng advanced memory tm
-
ngs.
Extreme Memory Pro󰘰le(X.M.P.)
Ths tem s used to enable/dsable the Intel Extreme Memory Pro󰘰le (XMP). For further
nformaton please refer to Intel’s o󰘲cal webste.
Memory Rato
Ths tem allows you to set the memory multpler.
Adjusted DRAM Frequency (MHz)
It shows the adjusted DRAM frequency. Read-only.
QPI Rato
Ths tem allows you to set the QPI multpler.
Adjusted QPI Frequency (MHz)
It shows the adjusted QPI frequency. Read-only.
ClockGen Tuner
Press <Enter> to enter the sub-menu and the followng screen appears.
CPU Ampltude Control/ PCIE Ampltude Control
These tems are used to select the CPU/ PCI Express clock ampltude.
Adjust PCI-E Frequency (MHz)
Ths 󰘰eld allows you to select the PCIE frequency (n MHz).
▶
▶
▶
▶
▶
▶
▶
▶
▶
▶
▶
▶
▶
▶