MSI H61MU-E35 series - Page 45

BIOS Setup
MS-7680
Chapter 3
3-9
BIOS Setup
MS-7680
Chapter 3
Parallel Port
Ths tem allows you to enable/ dsable the parallel port.
Change Settngs
Select an address and correspondng nterrupt for the seral port.
Devce Mode
Select a devce mode for parallel port.
H/W Montor
Press <Enter> to enter the sub-menu.
CPU Smart Fan Target
The Smart Fan functon controls the CPU fan speed automatcally dependng on the
current temperature to keep t wth n a spec󰘰c range. You can enable a fan target
value here. If the current CPU fan temperature reaches to the target value, the smart
fan functon wll be actvated.
SYS Fan 1 Control/ SYS Fan2 Control
These tems allow users to select how percentage of speed for the SYSFAN1/ SYS
-
FAN2.
CPU/ System Temperature, CPU FAN/ SYS FAN 1/ 2 Speed, CPU Vcore Voltage,
CPU IO Voltage, DRAM Voltage, GPU Voltage, 3.3V, 5V, 12V
These tems show the current status of all of the montored hardware devces/com
-
ponents such as CPU voltage, temperatures and all fans’ speeds.
Power Management Setup
Press <Enter> to enter the sub-menu.
▶
▶
▶
▶
▶
▶
▶
▶