MSI H67A-G43 (B3) - Page 42

3-8
BIOS Setup
Internal PLL Overvoltage
Ths tem are used to adjust the PLL voltage.
EIST
The Enhanced Intel SpeedStep technology allows you to set the performance level of
the mcroprocessor whether the computer s runnng on battery or AC power. Ths 󰘰eld
wll appear after you nstalled the CPU whch supports speedstep technology.
Intel Turbo Boost
Ths tem wll appear when you nstall a CPU wth Intel Turbo Boost technology. Ths
tem s used to enable/ dsable Intel Turbo Boost technology. It can scale processor
frequency hgher dynamcally when applcatons demand more performance and TDP
headroom exsts. It also can delver seamless power scalablty (Dynamcally scale up,
Speed-Step Down). It s the Intel newly technology wthn newly CPU.
OC Gene Button Operaton
Ths 󰘰eld s used to enable/ dsable OC Gene functon.
DRAM Frequency
Ths tem allows you to adjust the DRAM frequency. Please note the overclockng be
-
havor s not guaranteed.
Adjusted DRAM Frequency
It shows the adjusted DRAM frequency. Read-only.
DRAM Tmng Mode
Select whether DRAM tmng s controlled by the SPD (Seral Presence Detect) EE
-
PROM on the DRAM module. Settng to [Auto] enables DRAM tmngs and the followng
“Advanced DRAM Con󰘰guraton” sub-menu to be determned by BIOS based on the
con󰘰guratons on the SPD. Selectng [Lnk] or [Unlnk] allows users to con󰘰gure the
DRAM tmngs and the followng related “Advanced DRAM Con󰘰guraton” sub-menu
manually.
Advanced DRAM Con󰘰guraton
Press <Enter> to enter the sub-menu.
Command Rate
Ths settng controls the DRAM command rate.
tCL
Ths controls the CAS latency, whch determnes the tmng delay (n clock cycles)
before SDRAM starts a read command after recevng t.
▶
▶
▶
▶
▶
▶
▶
▶
▶
▶