Need help?Do you have a question about the MSI H67MA-E35 (B3) and is the answer not in the manual?
General| Form Factor | Micro ATX |
|---|---|
| Socket | LGA 1155 |
| Chipset | Intel H67 |
| Maximum Memory | 32GB |
| PCI Express 2.0 x16 | 1 |
| PCI Express x1 | 2 |
| PCI Slots | 1 |
| SATA 3Gb/s | 4 |
| SATA 6Gb/s | 2 |
| USB 3.0 | 2 |
| Audio Chipset | Realtek ALC892 |
| LAN Chipset | Realtek RTL8111E |
| Video Outputs | HDMI, DVI, VGA |
| Memory Slots | 4 x DIMM |
Essential precautions for safe operation and handling of equipment.
Caution regarding explosion risk if battery is replaced incorrectly.
Statement on compliance with FCC rules for digital devices and interference mitigation.
EU directive information on responsible disposal of electronic equipment.
Details on supported CPU types and where to find more information.
Specifies the Intel H67 (B3) chipset used on the mainboard.
Information on DDR3 DIMM slots, speed, capacity, and dual-channel mode.
Details about the Realtek RTL8111E LAN controller.
Information on the integrated Realtek ALC887 HD audio codec.
Specifications for SATA 6Gb/s and 3Gb/s ports.
Details on RAID support via Intel Matrix Storage Technology.
Details on high-speed Serial ATA interface ports for connecting storage devices.
Instructions for installing the CPU and ensuring proper cooling to prevent overheating.
Safety precautions and steps for safely replacing the CPU.
Information about the mainboard's overclocking capabilities and recommendations.
Detailed visual guide for correctly installing the CPU into the socket.
Instructions for securing the CPU and ensuring the cooler is properly attached.
Critical reminders for successful CPU and cooler installation.
Steps to finalize the cooler attachment and connect the CPU fan cable.
Reminders regarding CPU fan installation and BIOS status.
Explanation of DIMM slots, DDR3 support, and memory capacity.
Rules for populating memory modules for optimal dual-channel performance.
Key considerations for installing DDR3 memory modules and dual-channel configuration.
Visual guide on how to properly insert and secure memory modules into DIMM slots.
Advice on verifying that memory modules are correctly seated and locked.
Details on connecting the ATX 24-pin power supply to the mainboard.
Information on the ATX 4-pin connector for CPU power delivery.
Crucial advice for ensuring stable operation through correct power supply connections.
Description of all ports and connectors on the mainboard's rear panel.
Instructions for clearing the CMOS settings using the JBAT1 jumper.
Warning about the proper procedure for clearing CMOS to avoid damaging the mainboard.
Basic information on the BIOS Setup program and its uses.
Instructions on how to enter the BIOS Setup utility upon system boot.
Options for adjusting frequency, voltage, and overclocking settings.
Steps to load default BIOS settings for optimal performance.
Procedure for saving configuration changes and exiting the BIOS setup utility.
Controls the CPU multiplier for internal clock speed adjustment.
Selects control for DRAM timings, either via SPD or manual configuration.
Sub-menu for detailed manual configuration of DRAM timings.
Sub-menu for advanced memory timing settings per channel.
Enhances performance by treating cores as logical processors.
To Next Page