MSI Hybrid Triplex - Page 52

aligned with the first available slot rotate the packing nut retention screw clockwise until the hex end
is flush with the packing nut face and snug with a 9/16” wrench. Do not over tighten the screw.
14) Reinstall the suction covers using the valve cover tool and a 10 lb. hammer.
15) Slide the safety cover back over the packing access ports and re-tighten the screws.
Revision K 03/12/2019
MSI - A Division of Dixie Iron Works, Ltd. All rights reserved.
Page 49