2-17
Hardware Setup
IEEE1394 Connector: J1394_1 (optional)
This connector allows you to connect the IEEE1394 device via an optional IEEE1394
bracket.
Pin Definition
PIN SIGNAL PIN SIGNAL
1 TPA+ 2 TPA-
3 Ground 4 Ground
5 TPB+ 6 TPB-
7 Cable power 8 Cable power
9 Key (no pin) 10 Ground
S/PDIF Bracket (optional)
S/PDIF-Out Connector: SPDOUT1
This connector is used to connect S/PDIF (Sony & Philips Digital Interconnect Format)
interface for digital audio transmission.
J1394_1
1
2
9
10
SPDOUT1
VCC
SPDIF
GND
1394+USB Bracket
(Optional)
connect the GREEN connector to J1394_1
To Next Page
Loading...
