MSI K9A2 Platinum series

BIOS Setup
3-11
Extra RAID Controller (for Promise RAID, optional)
This item allows you to enable/disable the onboard extra RAID controller.
HW HD Audio Controller
This setting is used to enable/disable the HD audio controller.
On-Chip ATA Devices
Press <Enter> to enter the sub-menu:
PCI IDE BusMaster
This item allows you to enable/ disable BIOS to used PCI busmastering for
reading/ writing to IDE drives.
On-Chip SATA Controller (for SB600 RAID)
These items allow users to enable or disable the SATA controller.
SATA Mode (for SB600 RAID)
This item is used to enable/disable the RAID function for SATA devices.
I/O Devices
Press <Enter> to enter the sub-menu:
COM Port 1
This item specifies the base I/O port addresses of the onboard Serial Port.
Important
If you intend to use a extra RAID function card, you have to disable the
“Extra RAID Controller” item.