MS-7376 Mainboard
C-2
RAID Configuration
Creating and deleting RAID set and performing other RAID setting up operations are
done in the RAID BIOS. During bootup, a screen similar to the one below will appear
for about few seconds. Press <Ctrl-F> to enter FastBuild utility.
The FastBuild menu screen will appear. The Main Menu is used to choose the opera-
tion to be performed.
Important
Be sure to enable the RAID function for SATA device in BIOS (please refer
the Intergrated Peripherals section in BIOS) before configuting the
Fastbuild Utility.
To Next Page
Loading...
