MS-7501 Mainboard
3-12
USB Controller
This setting allows you to enable/disable the onboard USB 1.1/ 2.0 controller.
USB Device Legacy Support
Set to [Enabled] if you need to use any USB 1.1/2.0 device in the operating system
that does not support or have any USB 1.1/2.0 driver installed, such as DOS and SCO
Unix. Set to [Disabled] only if you want to use any USB device other than the USB
mouse.
Onboard LAN Controller
This setting allows you to enable/disable the onboard LAN controller.
LAN Option ROM
The items enable or disable the initialization of the onboard LAN Boot ROM during
bootup. Selecting [Disabled] will speed up the boot process.
Onboard IEEE1394 Controller (Optional)
This item allows you to enable/disable the onboard IEEE1394 controller.
HD Audio Controller
This setting is used to enable/disable the High Definition Audio interface.
Integrated Peripherals
To Next Page
Loading...
