MS-7501 Mainboard
3-16
Resume From S3 By PS/2 Keyboard
This controls how the PS/2 keyboard is able to power on the system. If you
choose Specific Key, the power button on the case will not function any more
and you must type the password to power on the system.
Resume from S3 By PS/2 Mouse
This setting determines whether the system will be awakened from what power
saving modes when input signal of the PS/2 mouse is detected.
Resume By PCI Device (PME#)
When set to [Enabled], the feature allows your system to be awakened from the
power saving modes through any event on PME (Power Management Event).
Resume By PCI-E Device
When set to [Enabled], the feature allows your system to be awakened from the
power saving modes through any event on PCIE device.
Resume By RTC Alarm
The field is used to enable or disable the feature of booting up the system on a
scheduled time/date.
To Next Page
Loading...
