2-12
MS-7368 Mainboard
CD-In Connector: JCD1
This connector is provided for external audio input.
JCD1
JCI1
2
CINTRU
GND
1
Serial ATA Connector: SATA1/ SATA2/ SATA3/ SATA4
This connector is a high-speed Serial ATA interface port. Each connector can con-
nect to one Serial ATA device.
SATA1
SATA2
SATA3
SATA4
Important
Please do not fold the Serial ATA cable into 90-degree angle. Otherwise,
data loss may occur during transmission.
Chassis Intrusion Connector: JCI1
This connector connects to the chassis intrusion switch cable. If the chassis is
opened, the chassis intrusion mechanism will be activated. The system will record
this status and show a warning message on the screen. To clear the warning, you
must enter the BIOS utility and clear the record.
GND
RL
PDF created with pdfFactory Pro trial version www.pdffactory.com
To Next Page
Loading...
