MSI K9NGM Series

BIOS Setup
3-13
On-Chip ATA Devices
Press <Enter> to enter the sub-menu and the following screen appears:
PCI IDE BusMaster
This item allows you to enable/ disable BIOS to used PCI busmastering for
reading/ writing to IDE drives.
On-Chip IDE Controller
This item allows you to enable/ disable IDE Controller.
Serial-ATA 0/1
These items allow users to enable or disable the SATA channel 0/1.
Onchip RAID Controller
This item is used to enable/disable the nVidia RAID function.
SATA 0/ 1 Primary/ Secondary Channel
These itemsallow users to enable or disable the RAID function for each SATA
hard disk drive.
I/O Devices
Press <Enter> to enter the sub-menu and the following screen appears:
Onboard Floppy Controller
Select [Enabled] if your system has a floppy disk controller (FDD) installed on the
system board and you wish to use it. If you install add-on FDC or the system has
no floppy drive, select [Disabled] in this field.