A-12
MS-6712 ATX Mainboard
* Line In function is converted to Line Out function when 4-Channel Mode for
4-Speaker Output is selected.
4-Channel Mode for 4-Speaker Output
The audio jacks on the back panel always provide 2-channel analog
audio output function, however these audio jacks can be transformed
to 4- or 6- channel analog audio jacks by selecting the corresponding
multi-channel operation from No. of Speakers.
Refer to the following diagram and caption for the founction of each
jack on the back panel when 4-Channel Mode is selected.
Back Panel
3
1
2
2 MIC
3 * Line Out (Rear channels)
1 Line Out (Front channels)
To Next Page
Loading...
