MSI K8MM-V User Manual

i
FCC-B Radio Frequency Interference Statement
This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part
15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may
cause harmful interference to radio communications. Operation of this equipment in a residential area is likely
to cause harmful interference, in which case the user will be required to correct the interference at his own
expense.
Notice 1
The changes or modifications not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
Notice 2
Shielded interface cables and A.C. power cord, if any, must be used in order to comply with the emission limits.
VOIR LA NOTICE D’NSTALLATION AVANT DE RACCORDER AU RESEAU.
Micro-Star International
MS-7142
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired
operation
G52-M7142X1

MSI K8MM-V Specifications

General

Brand	MSI
Model	K8MM-V
Category	Motherboard
Language	English

Summary

Safety Instructions

Introduction

Motherboard Layout

Specifications

CPU and Chipset Specifications

Details on supported processors and VIA K8M800-CE/VT8237R chipsets.

Main Memory and Slots

Information on DDR SDRAM support and AGP/PCI slot configurations.

Onboard Peripherals and Connectivity

Details on IDE, Audio, LAN, and other onboard peripheral ports.

BIOS and System Dimensions

Overview of BIOS features, mainboard dimensions, and mounting holes.

Hardware Setup

Rear Panel and CPU Installation

Description of rear panel connectors and CPU installation guide.

CPU Cooler and Memory Installation

Instructions for installing the CPU cooler and DDR memory modules.

Power Supply and Drive Connectors

Details on ATX power supply, FDD, and CD-ROM connectors.

Internal Connectors and Headers

Information on fan, IDE, and front panel connectors.

System Interfaces and Configuration

Details on Serial ATA, CMOS, SPDIF, chassis intrusion, and expansion slots.

BIOS Setup

Main BIOS Interface and Navigation

Overview of the main BIOS setup screen and navigation keys.

BIOS Setup Options

Descriptions of various BIOS setup options and their functions.

Advanced Cell Menu Functions

Details on CPU clock, voltage, and spread spectrum settings.