Need help?Do you have a question about the MSI MEGA ePower 200AV+ and is the answer not in the manual?
General| Chipset | Intellon INT6400/INT1400 |
|---|---|
| LED’s | Power Ethernet: Ethernet Link and Activity Data: PLC Link and Activity |
| Push Button | Reset: Restore the default factory parameter Security: Set up network password automatically |
| Protocol | HomePlug AV 1.0 Co-exists with existing HomePlug 1.0 |
| PLC Rate | 200Mb |
| Modulation Band | 2-30MHz |
| Modulation Schemes | Supports1024/256/64/16/8-QAM, QPSK, BPSK and ROBO |
| Encryption | 128 AES |
| System Support | Windows 98SE, 2000, ME, XP 32/64 bit and Vista 32/64bit |
| Outlet current | 220VAC 16A Maximum，110VAC 20A Maximum |
| Consumption | 3.5W |
| Input Rating | 100-240 VAC, 50/60Hz |
| Filter characteristics | -22 dB to -45 dB |
| Certifications | CE, UL, FCC Part 15 Class B |
| Green Standard | RoHS |
| Operating Temperature | 0º to 45º C |
| Storage Temperature | -20 º to 70 º C |
| Operating Humidity | 10% to 90% Non-condensing |
| Storage Humidity | 5% to 90% Non-Condensing |
Weight and Dimensions| Physical Characteristics | L×W×H: 130.5mm×69mm×79mm |
|---|---|
| Weight | 233g |
Outlines necessary hardware and software specifications for the device.
Covers the main interface for viewing and managing local and remote HomePlug devices.
Step-by-step guide on creating a new network using the NMK button.
Instructions for adding a new device to an existing HomePlug network.
To Next Page
