CHAPTER 2 HARDWARE INSTALLATION
2-33
2.26 Keyboard Power: JKBV
The JKBV jumper is for setting keyboard power. This function should be set
in the BIOS for the keyboard and PS/2 mouse Wake-up function.
JKBV
1
3
5V (default)
Disable keyboard
power on function
5V Standby
Enable keyboard
power on function
1
3
1
3
Note: To be able to use this function, you need a power supply that
provide enough power for this feature.
(Power supply with 750 mA 5V Stand-by)
To Next Page
Loading...
