CHAPTER 3 AWARD
®
BIOS SETUP
3-22
HDD & FDD
When you choose either HDD or FDD, any activity from one of the
listed system peripheral devices wakes up the system.
Wake Up On LAN
To use this function, you need a LAN add-on card which support
power on functions. It should also support the wake-up on LAN jumper
(JWOL1).
Enabled Wake up on LAN is supported.
Disabled Wake up on LAN is not supported.
Modem Ring Resume
An input signal on the serial Ring Indicator (RI) line (in other
words, an incoming call on the modem) awakens the system from a soft off
state.
RTC Alarm Resume
When Enabled, your can set the date and time at which the RTC (real-
time clock) alarm awakens the system from Suspend mode.
To Next Page
Loading...
