CHAPTER 2 HARDWARE INSTALLATION
2-3
2.1-3 Overclocking Jumper: SW2/SW3
Overclocking is a process of operating a CPU/Processor beyond its
specified frequency. SW2/SW3 is used for overclocking.
SW2
SW3
SW2 SW3 Feature
Automatically detect 66MHz, 100MHz,
133MHz CPU Bus Frequency
Virtually set CPU Bus Frequency
into 100MHz
Virtually set CPU Bus Frequency
into 133MHz
Note If you used this jumper for overclocking, you also need to modify the
CPU Bus ratio thorugh CMOS.
To Next Page
Loading...
