2-3
Hardware Setup
CPU (Central Processing Unit)
Important
1. Overheating will seriously damage the CPU and system. Always make
sure the cooling fan can work properly to protect the CPU from overheating.
2. Make sure that you apply an even layer of heat sink paste (or thermal tape)
between the CPU and the heatsink to enhance heat dissipation.
3. While replacing the CPU, always turn off the ATX power supply or unplug
the power supply’s power cord from the grounded outlet first to ensure the
safety of CPU.
The mainboard supports AMD
®
Sempron / Athlon64 / Athlon64 X2 AM2 processors in
Socket 940. When you are installing the CPU, make sure the CPU has a heat sink
and a cooling fan attached on the top to prevent overheating. If you do not
have the heat sink and cooling fan, contact your dealer to purchase and install them
before turning on the computer.
For more information on compatible components, please visit http://www.msi.com
.
tw/program/products/mainboard/mbd/pro_mbd_cpu_support.php.
To Next Page
Loading...
