MSI MS-7242 - Page 49

3-13
BIOS Setup
On-Chip ATA Devicess
On-Chip IDE Controller
Setting to [Disabled] disables the integrated IDE controller. Setting to [Enabled]
enables only the Primary IDE controller.
PCI IDE BusMaster
Set this option to [Enabled] to specify that the IDE controller on the PCI local bus
has bus mastering capability.
OnChip SATA Controller
This setting controls the onchip SATA controller.
OnChip SATA Type
This setting specifies the function type of SATA devices.
I/O Devices Configuration
COM Port 1
Select an address and corresponding interrupt for Serial Port 1.
Parallel Port
This setting specifies the I/O port address and IRQ of the onboard parallel port.
Parallel Port Mode
This setting specifies the parallel port mode.