BIOS Setup
3-27
CPU Clock Overclocking
The CPU Frequency (MHz)/ CPU Dynamic OverClocking / Processor Fre-
quency Multiplier are the items for you to overclock the CPU and the Memory.
Please refer to the descriptions of these fields for more information.
2. At the fourth reboot, BIOS will determine that the previous overclocking is failed
and restore the default settings automatically. Please press any key to boot the
system normally when the following message appears on screen.
Warning !!! The previous performance of overclocking is failed,
and the system is restored to the defaults setting.
Please press any key to continue...
Clear CMOS
- Please refer to “chapter 2” for more information about how to clear CMOS data.
Two ways to save your system from failed overclocking...
Reboot
1. Press the Power button to reboot the system three times. Please note that, to
avoid electric current to affect other devices or components, we suggest an
interval of more than 10 seconds among the reboot actions.
1.CPU Speed = CPU Frequency (MHz) * Processor Frequency Multiplier
2.This motherboard supports overclocking greatly. However, please make
sure your peripherals and components are bearable for some special
settings. Any operation that exceeds product specification is not
recommended. Any risk or damge resulting from improper operation will
not be under our product warranty.
Important
To Next Page
Loading...
