BIOS Setup
3-15
To operate the onboard parallel port as Standard Parallel Port only, choose [SPP].
To operate the onboard parallel port in the EPP mode simultaneously, choose
[EPP]. By choosing [ECP], the onboard parallel port will operate in ECP mode only.
Choosing [ECP + EPP] will allow the onboard parallel port to support both the ECP
and EPP modes simultaneously.
Parallel Port IRQ
This item allows you to set parallel port IRQ.
nVidia RAID Setup
Press <Enter> to enter the sub-menu and the following screen appears:
nVidia RAID Function
This item is used to enable/disable the nVidia RAID function.
SATA 0/ 1 Primary/ Secondary Channel
These itemsallow users to enable or disable the RAID function for each SATA
hard disk drive.
To Next Page
Loading...
