BIOS Setup
3-11
USB Controller
This setting allows you to enable/disable the onboard USB 1.1/ 2.0 controller.
USB Device Legacy Support
Select [Enabled] if you need to use a USB-interfaced device in the operating system.
Onboard LAN Controller
This setting allows you to enable/disable the onboard LAN controller.
LAN Option ROM
This item is used to decide whether to invoke the Boot ROM of the onboard LAN.
ESATA Controller (optional)
This setting allows you to enable/disable the onboard ESATA controller.
ESATA Option ROM (optional)
This item is used to decide whether to invoke the Boot ROM of the onboard ESATA.
Onboard IEEE1394 Controller (optional)
This item allows you to enable/disable the onboard IEEE1394 controller.
HD Audio Controller
This setting is used to enable/disable the HD audio controller.
Integrated Peripherals
To Next Page
Loading...
