Display Full Screen Logo
This BIOS feature determines if the BIOS should hide the normal POST mes
-
sages with the motherboard or system manufacturer’s full-screen logo.
When it is enabled, the BIOS will display the full-screen logo during the boot-
up sequence, hiding normal POST messages.
When it is disabled, the BIOS will display the normal POST messages, instead
of the full-screen logo.
Please note that enabling this BIOS feature often adds 2-3 seconds of delay
to the booting sequence. This delay ensures that the logo is displayed for a
sufcient amount of time. Therefore, it is recommended that you disable this
BIOS feature for a faster boot-up time.
Boot Device Priority
The items allow you to set the sequence of boot devices where BIOS attempts to
load the disk operating system. First press <Enter> to enter the sub-menu. Then
you may use the arrow keys ( ↑↓ ) to select the desired device, then press <+>,
<-> or <PageUp>, <PageDown> key to move it up/down in the priority list.
USB Drives
This setting allows users to set the priority of the USB devices. First press <En
-
ter> to enter the sub-menu. Then you may use the arrow keys ( ↑↓ ) to select the
desired
device,
then
press
<+>,
<->
or
<PageUp>,
<PageDown>
key
to
move
it
up/down in the priority list.
▶
▶
▶
To Next Page
Loading...
