Chapter 2
System Setup
This chapter provides you with the information on
hardware setup procedures. While doing the installa-
tion, be careful in holding the components and follow
the installation procedures. For some components, if
you install in the wrong orientation, the components
will not work properly.
Use a grounded wrist strap before handling computer
components. Static electricity may damage the com-
ponents.
Important
Always unplug the power cord before installing
any components.
When the operating temperature reaches 40
o
C or
higher, please replace your HDD with SSD (Solid-
State Drive) or other types of heat-resistant HDD
to protect your HDD from being damaged by high
temperature.
•
•
To Next Page
Loading...
