MSI MS-9A29 - Page 38

3-8
BIOS Setup ▍
Super IO Conguration
Serial Port 1/ 2/ 3/ 4 Conguration
This setting enables/disables the specied serial port.
Change Settings
This setting is used to change the address & IRQ settings of the
specied serial port.
Mode Select
Select an operation mode for the serial port 1.
FIFO Mode
This setting controls the FIFO data transfer mode.
Watch Dog Timer
You can enable the system watch-dog timer, a hardware timer that gen-
erates a reset when the software that it monitors does not respond as
expected each time the watch dog polls it.
▶
▶
▶
▶
▶
▶